Intelligent Water Meter Manufacturer

1、首先当然是他的抄表方式不同.有线抄表需要布线,总线为RS485或者M-BUS,通过对应的协议传输到集中器,再传输到电脑里.无线智能水表的无线抄表系统则不需要复杂的布线,不依赖人工入室抄录,经由抄表终端参数值便能够自行计算出水表的用量和费用.

1. First of all, of course, his meter reading methods are different. Wired meter reading needs wiring. The bus is RS485 or M-BUS. The corresponding protocol is transmitted to the concentrator and then to the computer. The wireless meter reading system of wireless intelligent meter does not need complicated wiring, does not rely on manual room reading, and can be calculated by itself through the parameter value of meter reading terminal. Calculate the amount and cost of the water meter.

2、工作原理不一样.有线智能水表的抄表方式在抄录表的过程中采用的是半手动抄录模式,而在后期计量最终费用结果也是人工模式.而无线抄表系统则采用的是的现代先进的科学技术研制而成,不管是在抄录阶段还是在费用计量阶段都能够直接依赖系统计算而出,故而无线抄表系统的工作自动化程度要远远高于传统抄表..

2. The working principle is different. In the process of reading meter, the wired intelligent water meter adopts the semi-manual mode, while in the later stage, the final cost measurement result is also the manual mode. The wireless meter reading system is developed by modern advanced science and technology, whether in the stage of transcription or in the stage of cost measurement. Sections can be calculated directly by the system, so the automation of the wireless meter reading system is much higher than that of the traditional meter reading system.

 http://www.sdlyxqyb.com