ic卡智能水表电池怎样拆卸大神支招

　　裁开充电电池仓铅封，卸掉固定不动舱盖的螺钉，取下充电电池，充电电池仓在智能水表底边。

　　Cut the lead seal of the battery compartment, remove the screw fixing the compartment cover, and take out the battery. The battery compartment is at the bottom of the water meter.

　　轻按锁扣，拔开连接头，断掉充电电池锁扣联接。智能水表应用的为二节3V锂电，充电电池与智能水表由锁扣联接。

　　Press the buckle, disconnect the connector and disconnect the battery buckle. The water meter uses two 3V lithium batteries, which are connected with the water meter by a buckle.

　　新充电电池购到后，留意正负是不是与原来充电电池同样，关键看电极连接线。如恰当准确无误，将锁扣与智能水表锁扣接插就能。

　　After the new battery is purchased, pay attention to whether the positive and negative poles are the same as the original battery, mainly depending on the connecting wire. If it is correct, insert the buckle and the water meter buckle.

　　卡智能水表电池怎么更换

　　How to replace the battery of card smart water meter

　　这时不心急盖上充电电池舱盖，先加自己水卡插进智能水表，插进后智能水表继电器姿势，屏幕上显示有关大数字，证实充电电池工作中一切正常，智能水表能够工作中。留意：智能水表中将会存在小量的流水出。